Windows not installing

[Priyan$hu]

Hey dm plz help
I am trying to install win 7 on my pc but it is not installing.its stuck at 0% of expanding windows.i hv tried 4 dvds of win 7,win 8 and also with another dvd writer but nothing worked.
Plz help error is 0x80070014

 

[zakir370]

I would suggest using a different DVD drive, or maybe copying the installation files to a USB stick (4gb or bigger) and performing a USB install.
The error 0x80070017 translates to "CRC Error" which means that the files that are being copied from the disk are not making it to the hard drive with the same structure, meaning that the "original" files on the disk are being modified/changed/corrupted while being copied to the "destination" location on your hard drive during the install.
This usually means either a bad DVD, or a read error on the DVD drive.

Source : http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-7-installation-error-code-0x80070017/2ea19373-2b4a-47e7-8584-04c6966589c3

 

[Priyan$hu]

I would suggest using a different DVD drive, or maybe copying the installation files to a USB stick (4gb or bigger) and performing a USB install.
The error 0x80070017 translates to "CRC Error" which means that the files that are being copied from the disk are not making it to the hard drive with the same structure, meaning that the "original" files on the disk are being modified/changed/corrupted while being copied to the "destination" location on your hard drive during the install.
This usually means either a bad DVD, or a read error on the DVD drive.

Source : http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-7-installation-error-code-0x80070017/2ea19373-2b4a-47e7-8584-04c6966589c3

Invalid partition table error using pd

 

[zakir370]

Invalid partition table error using pd

It might be because you are booting from hdd which has invalid partition table, try to boot from pd.
Press F10 while booting and select the pd as your boot device or so, it depends upon the bios.

Make sure your PD's partition is active, you can make it active by going to Computer Management -> Disk Management -> Right click your pd partition and click Mark partition as active.

 

[VIP3R]

Bro try this first then try to fix the OS later..fixing smaller one may help you to get rid out of bigger one..

How to run the Bootrec.exe tool

To run the Bootrec.exe tool, first start the Windows RE:

1. Put the Windows Vista or Windows 7 media in the DVD drive, and then start the computer.
2. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard, or an input method, and then click Next.
4. Click Repair your computer.
5. Select the operating system that you want to repair, and then click Next.
6. In the System Recovery Options dialog box, click Command Prompt.
7. Type Bootrec.exe, and then press Enter.

Note To start the computer from the Windows Vista or Windows 7 DVD, the computer must be configured to start from the DVD drive. For information about how to do this, see the documentation that was included with the computer, or contact the computer manufacturer.

Bootrec.exe options

The Bootrec.exe tool supports the following options. Use the option that's appropriate for your situation.

/FixMbr

This option writes a Windows 7 or Windows Vista-compatible MBR to the system partition. It does not overwrite the existing partition table. Use this option when you must resolve MBR corruption issues, or when you have to remove nonstandard code from the MBR.
/FixBoot

This option writes a new boot sector to the system partition by using a boot sector that's compatible with Windows Vista or Windows 7. Use this option if one of the following conditions is true:

• The boot sector was replaced with a nonstandard Windows Vista or Windows 7 boot sector.
• The boot sector is damaged.
• An earlier Windows operating system was installed after Windows Vista or Windows 7 was installed. In this situation, the computer starts by using Windows NT Loader (NTLDR) instead of Windows Boot Manager (Bootmgr.exe).

/ScanOs

This option scans all disks for installations that are compatible with Windows Vista or Windows 7. It also displays the entries that are currently not in the BCD store. Use this option when there are Windows Vista or Windows 7 installations that the Boot Manager menu does not list.
/RebuildBcd

This option scans all disks for installations that are compatible with Windows Vista or Windows 7. Additionally, it lets you select the installations that you want to add to the BCD store. Use this option when you must completely rebuild the BCD store.

Note Use the Bootrec.exe tool to troubleshoot a "Bootmgr Is Missing" error. If rebuilding the BCD store doesn't resolve the startup issue, you can export and delete the BCD store and then run this option again. By doing this, you make sure that the BCD store is completely rebuilt.

To do this, type the following commands at the Windows RE command prompt:

• bcdedit /export C:\BCD_Backup
• c:
• cd boot
• attrib bcd -s -h -r
• ren c:\boot\bcd bcd.old
• bootrec /RebuildBcd

Source : microsoft

 

[mkarande786]

bro install win 8 instead of 7.

 

[Sujalraj]

Bhai Pehle Pen Drive Se format kar ke dekh lo agar nahi hoga toh maine Solution bataunga
Ho sakta hai DVD writer mein Problem ho

 

[rockon]

Only 1 solution.. Make two partition.. C &d .. Install win7 on d drive.. If it works then its OK.. If its not installing then ur CD is corrupted.

 

[rockon]

Only 1 solution.. Make two partition.. C &d .. Install win7 on d drive.. If it works then its OK.. If its not installing then ur CD is corrupted.

I mean hard disk is corrupted.

 

[King Aaban]

win 8 mast h jaldi b install ho jaati h

 

[manojbux010]

Need a Proper Screenshot of ur problem or errors

 

[Manthan]

Bro u must use zotac USb software and install windows 7 though pendrive its is fast and easy to use for any help inbox meee..

 

[manojbux010]

i just installed my windows 8 through pendrive..............

 

[Manthan]

i just installed my windows 8 through pendrive..............

yeah it is better den install any window from a cd it takes lots of time and error..............usb is the best opt.

 

[Manthan]

Priyanshu one more suggestion frm my side u zst install a image file of any windows frm online website and use usb drive to fomat..!!

 

[Jr.Albert]

for hdd errors
use HBCD.iso to check disk errors
write 0's and 1's on bad sectors
then make any bootable W7 usb .
install

 

[Ubaid]

Priyanshu PLs give me your configs

 

[Ubaid]

Bhai restore krdo

 

[Priyan$hu]

@all solved the problem thnx for d help
Dust was casuing the problem.
Cleaning solved it

Mods can lock thread